Driver Options:

• 16 mm Spigot
• Automotive Reversible Ratchet 3/8” ½” ¾”
• 9x12mm and 14x18 mm female end
• Push-Through Square Drive 3/8” ½” ¾”

P Type Industrial Push-Through Square Drive Torque Wrenches

'P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The push-through ratchets on these models are robustly engineered for strength and durability. The strength and high wear resistance comes from a coarse tooth pattern while a principle of offset ratchet pawls gives a narrow engagement angle. The push-through square drive is not only a robust design but allows the wrench to be used for torque control in both the clockwise and anti clockwise directions, and allows for a wider model range of up to 400 N·m.

P Type Automotive Reversible Ratchet Torque Wrenches

P' Type Torque Wrenches are designed for the production environment where they will be set and then dedicated to a particular application. There is no scale, the wrench must be set against a torque testing device such as Norbar's Professional Torque Tester. The reversible ratchets on these models are designed with compact dimensions and a narrow engagement angle resulting from the 72 tooth pattern. These features make the wrench ideal for use in the combined spaces of modern motor vehicles and many other applications.

'P' Type 16mm Spigot Entry Torque Wrenches

The Professional torque handle with 16mm spigot offers an ideal combination of accuracy, robust construction, comfort and ease of use.

Production 'P' Types versions are for use in a production environment where they will be set and then dedicated to a particular application. There is no scale, and so must be set against a torque testing device such as Norbar's Professional Torque Tester.

'P' Type Female End Torque Wrenches

The Female Professional torque handle offers an ideal combination of accuracy, robust construction, comfort and ease of use. They are supplied with a 9 x 12mm or 14 x 18mm rectangular type female end (dependant on torque capacity). Also available with 16mm spigot end.

These Production 'P' Types versions are for use in a production environment where they will be set and then dedicated to a particular application. There is no scale, and so must be set against a torque testing device such as Norbar's Professional Torque Tester.