/

NEO-HV Series permanent lifting magnets

NEO-HV Series

These NEO-HV lifting magnets are designed to lift loads from the horizontal position into the vertical and vice-versa. Imagine you have a plate lying on a pallet and you want to put it onto your horizontal machining center. Operators have to do this many times a day and they usually have to struggle with clamps, slings or chains, often needing two people, to turn and keep the component in position. Three standard models are available: NEO-HV 250, NEO-HV 500 & NEO-HV 1000 with maximum lifting capacities of 550, 1100 and 2200 lbs. on flat AISI 1020 steel. NEO-HV lifting magnets are adjustable to accommodate a range of flat plates & flat circular disks. Lifting arms, NEO-HV 250, NEO-HV 500 and NEO-HV 1000 can be purchased separately and retrofitted to a NEO-250, NE0-500 or NE0-1000 lifting magnet.

The NEO series permanent lifting magnets requires good surface conditions to achieve maximum lifting capacity. Thanks to Neodymium magnets they perform quite well on flat non-machined surfaces with some rust or scale. The NEO-HV model is ideally suited for in-plant handling, loading and unloading machine tools with a horizontal spindle and for plate handling in warehouses. Workload Limit (Rated Lift Capacity)

NEO HV 2 The maximum lifting capacity is based upon lifting clean, smooth, flat, low-carbon (AISI 1020) steel plate, 3 inches or thicker with the full area of the magnet's poles in contact with the load. Derating is required for plates or flat material with rust or scale, non-machined or uneven surface, plates thinner than 3 inches and alloy steels. Refer to the operator's manual for more detailed workload limits.

Uses

For vertical loading into machining centers and lathes

Standard Features and Benefits

Uses Standard NEO-250, NEO-500 or NEO-1000 lifting magnet
Detachable lifting arm HV-250, HV-500 and HV-1000
Meets all the requirements of ANSI/ASME B30.20 (safety standard)
Supplied with manual, pull test certificate, video, and safety poster.
Neodymium magnetic material

Specs

Specifications
Model	Rated Lifting Capacity (lbs.)	Length (in.)	Width (in.)	Height (in.)	Weight (lbs.)
NEO-HV 250	0 - 550	37.7	8.3	10	60
NEO-HV 500	0 - 1,100	45.6	10.8	10	86
NEO-HV 1000	0 - 2,200	47.7	13.6	12.2	158