3-Way/2-Position Solenoid Valve

Application – Single-acting cylinders.

Actuation – Solenoid operated, 115 volt, 50 Hz.

Functions – Cylinder piston advances when solenoid is de-energized and pump is running. When solenoid is energized, oil is directed to reservoir, and piston returns. For “hold” position, pump is stopped with solenoid de-energized.

Used on these pumps – PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series.

No. 9579 – 3-way/2-position solenoid valve, 115 volt, 50 Hz. Weight 4.4 kg.

No. 9569 – Same as 9579, except with 24 volt, 50 Hz solenoid.

No. 9570– Same as 9579 except with 230 volt, 50 Hz solenoid.

NOTES: Valves above are shipped without control switch. Use 202777 remote hand switch (see page 116). When this valve is mounted, the pump must be equipped with an outlet check valve.

3/4-Way/2-Position Solenoid Valves

Application – Single- or double-acting cylinders. When used with single-acting cylinders, one port should be plugged.

Actuation – Solenoid operated.

Functions – Oil is directed to “extend” side of cylinder, oil from “retract” side goes to reservoir; cylinder “holds” with pump shut off. Oil is directed to “retract” side of cylinder; oil from “extend” side goes to reservoir.

NOTE: Cylinder will not “hold” in the “return” position with motor running or shut off.

Used on these pumps – 9552, 9572 and 9592 are used with PE17, PE30 (with carrying handles removed), PE46, PE55, PE84, PE90, PE200, PE400, PQ60 and PQ120 series.

No. 9592 – 3/4-way/2-position solenoid valve, 115 volt, 50 Hz. Weight 6.6 kg.

No. 9552 – Same as 9592, except with 230 volt, 50 Hz solenoid.

No. 9572 – Same as 9592, except with 24 volt, 50 Hz solenoid.

NOTE: Valves above are shipped without controls. The 9552, 9572 and 9592 can be used with the 304718 remote hand control.

Note: Ports are 1/4" NPTF.

Air Actuated Valve

Application – Single- or double-acting cylinders. When used with single-acting cylinders, one port should be plugged.

Actuation – Air operated.

Functions – Oil is directed to “extend” side of cylinder, oil from “retract” side goes to reservoir; cylinder “holds” with pump shut off. Oil is directed to “retract” side of cylinder; oil from “extend” side goes to reservoir.

NOTE: Cylinder will not “hold” in the “return” position with motor running or shut off.

Used on these pumps – PA17, PA46 and PA55 series.

No. 9594 – 3/4-way/2-position solenoid valve, air operated (minimum of 4 bar air pressure required). Weight 5 kg.

NOTES: Valve above is shipped without controls. 9594 can be used with the 209593 remote hand control (see page 116). See also remote mounted models of this valve.

4-Way/3-Position (Open Centre) Solenoid Valve

Application – Double-acting cylinders.

Actuation – Solenoid operated, 115 volt, 50 Hz.

Functions – “Advance”, open centre and “return” positions. Cylinder ports and pump port are open to reservoir in “neutral”.

Used on these pumps – Furnished with pilot lines and adapters for PE30 (with carrying handles removed), PE55, PE90 and PE120 series. For other pump models contact us.

NOTE: A pressure switch and/or gauge may be attached if desired.

No. 9590 – 4-way/3-position (open centre) solenoid valve, 115 volt, 50 Hz. Weight 7 kg.

No. 9522 – Same as 9590 except for 230 volt, 50 Hz.

No. 9615 – Same as 9590 except for 24 volt, 50 Hz.

4-Way/3-Position (Tandem Centre) Pilot Operated Solenoid Valve

Application – Double-acting cylinders.

Actuation – Solenoid operated, 115 volt, 50 Hz.

Functions – “Advance”, “hold” and “return”. The “Posi-Check®” feature holds the load when shifting from the “advance” to the “hold” position.

Used on these pumps – PE17, PE21, PE30 (with carrying handles removed), PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series.

NOTE: A gauge may be attached if desired.

No. 9513 – 4-way/3-position (tandem centre) solenoid valve, 115 volt, 50Hz. Weight 8.2 kg.

No. 9512 – Same as 9513 except for 24 volt, 50 Hz circuits.

No. 9516 – Same as 9513 except for 12 volt DC. For use on the PG1204S and PG400 series pumps only.

No. 9519 – Same as 9513 except for 230 volt, 50 Hz circuits. Contact us for field installation.

3-Way/2-Position (Pilot Operated) Solenoid Valve

Application - Single-acting cylinders.

Actuation - Solenoid operated, 115 volt, 50 Hz.

Function - “Advance” and “return”.

Used on these pumps - Furnished with pilot lines and adapters for PE30 (with carrying handles removed), PE55, PE90 and PE120 series. For other pump models contact us.

NOTE: A pressure switch and/or gauge may be attached if desired.

No. 9589 – 3-way/2-position (pilot operated) solenoid valve, 115 volt, 50Hz. Weight 3.7 kg.

No. 9523 – Same as 9589 except for 230 volt, 50 Hz.

No. 9553 – Same as 9589 except for 24 volt, 50 Hz.