3-Way/2-Position Manual Valve

Applications – Single-acting cylinders.

Actuation – Lever operated.

Functions – Cylinder piston “advance”, “hold” and “return”.

Used on these pumps – P460, PE17, PE21, PE30, PE46, PE55, PE84, PE90, and PE120.

No. 9582 – 3-way/2-position manual valve. Wt. 1.13 kg.

No. 9584 – Same as 9582, but has “flipper” control. Weight 0.8 kg.

3-Way/2-Position Pilot Operated Automatic Valve

Application – Single-acting cylinders.

Actuation: Pilot oil.

Functions – When pump is started, pilot oil automatically closes valve and directs oil to cylinder; when pump is stopped, valve automatically opens and oil returns to reservoir.

Used on these pumps – Furnished with pilot lines and adapters for PA55, PA90, PE30, PE55, PE90 and PE120.

No. 9610 – 3-way/2-position pilot operated automatic valve. Weight 1.9 kg.

2/3-Way/2-Position Manual/Pilot Operated Automatic Valve

Application – Manual operation for load lifting and holding with single-acting cylinders; automatic “dump” for operating hydraulic tools.

Actuation – Flipper lever/pilot oil.

Functions – With lever in closed position, valve will hold the load. When lever is “open”, valve functions as a true automatic “dump” valve.

Used on these pumps – Furnished with pilot lines and adapters for PA55, PA90, PE30, PE55, PE90 and PE120 series. For application on other pumps please contact us.

No. 9610A – 2/3-way/2-position manual/pilot operated automatic valve. Weight 2 kg.

2-Way/2-Position Manual Valve

Application – Single-acting cylinders.

Actuation – Flipper lever operated.

Functions – Cylinder piston “advance”, “hold” and “retract”.

Used on these pumps – PE172, PA172 and PE84 series.

No. 9517 – 2-way/2-position manual valve. Weight 1.45 kg.

3/4-Way/2-Position Manual Valve

Application – Single- or double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – Pos. 1 – Oil is directed to “advance” side of cylinder, oil from “retract” side goes to reservoir; cylinder “holds” with pump shut off. Pos. 2 – Oil goes to “retract” side of cylinder; cylinder “holds” with pump shut off. When using as a 3-way valve for single-acting cylinders, port “A” or “B” is plugged.

Used on these pumps – P460, PA6D, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series.

No. 9504 – 3/4-way/2-position manual valve. Weight 1.9 kg.

NOTE: 9504 can be remote mounted with a 9510 subplate.

3-Way/3-Position (Closed Centre) Non-Interflow Manual Valve With Posi-Check®

Application – Single-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – Pos. 1 – Oil is directed from pump to cylinder and “holds” with pump shut off; line to reservoir is blocked. Pos. 2 – All oil is open to reservoir through tank line.

Center pos. – Cylinder pressure is held; pump should be shut off.

Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series.

NOTE: A pressure switch and/or gauge may be attached if desired. Also, the 9502 can be remote mounted if a 9510 subplate is used.

No. 9502 – 3-way/3-position (closed centre) manual valve. Weight 1.9 kg.

3-Way/3-Position (Tandem Centre) Manual Valve With Posi-Check®

Application – Single-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – “Advance” “hold” and “return”. When shifted to “return” position, pump and cylinder return oil through their own separate return lines, allowing faster retraction of piston. The “Posi-Check®” feature guards against pressure loss when shifting from “advance” to “hold” position.

Used on these pumps – P460, PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PQ60, PQ120, PE200, PE400, PG30, PG55, PG120 and PG400 series.

No. 9520 – 3-way/3-position (tandem centre) manual valve. Weight 2.3 kg.

3-Way/3-Position (Tandem Centre) Metering Valve

Application – Single-acting cylinders.

Actuation – Lever operated.

Functions – Cylinder piston metered “advance”, “hold” and metered “return”.

Used on these pumps – PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PQ60, PQ120, PE200, PE400, PG30, PG55, PG120 and PG400 series.

NOTE: A pressure switch and/or gauge may be attached if desired see pages 124-125, 117). Also, the 9576 can be remote mounted with a 9510 subplate.

No. 9576 – 3-way/3-position (tandem centre) metering valve. Weight 3.9 kg.

4-Way/3-Position (Tandem Centre) Valve With Posi-Check®

Application – Double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – “Advance”, “hold” and “return”. The “Posi-Check®” feature guards against pressure loss when shifting from “advance” to “hold” position.

Used on these pumps – P460, PA6D, PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PED, PG30, PG55, PG120, PG400, PQ60 and PQ120 series

No. 9506 – 4-way/3-position (tandem centre) manual valve. Weight 2.3 kg.

4-Way/3-Position (Tandem Centre) AND (OPEN-Centre) Manual ValveS

Application – Single- or double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – The 9500 provides “advance”, “hold” and “return”. The 9511 (open centre) valve can be used if holding is not a requirement, as when running two separate hydraulic tools. Provides “advance” and “return” only.

Used on these pumps – P460, PA17, PA46, PA55, PE17*, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PG30, PG55, PG120, PG400, PQ60 and PQ120 series. *Does not mount without 251528

No. 9500 – 4-way/3-position (tandem centre) manual valve. Weight 1.9 kg.

No. 9511 – Same as 9500, except has an open centre.

4-Way/3-Position (Closed Centre) Manual Valve With Posi-Check®

Application – Single- or double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – Similar to 9506, but is a closed centre valve with “Posi-Check®”. Generally used to operate multiple cylinders with a single pump. Provides “advance”, “hold” and “return”. The “Posi-Check®” feature guards against pressure loss when shifting from the “advance” to “hold” position.

Used on these pumps – P460, PA17, PA46, PA55, PA60, PA6D, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and PQ120 series.

No. 9507 – 4-way/3-position (closed centre) manual valve. Weight 2.3 kg.

4-Way/3-Position (Closed Centre) Manual Valve

Application – Single or double-acting cylinders.

Actuation – Lever operated, detent positioned.

Functions – “Advance”, “hold” and “return”. Closed centre design makes valve suitable for operating multiple cylinders from a single pump.

Used on these pumps – P460, PA17, PA46, PA55, PA60, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PQ60 and P120 series.

No. 9501 – 4-way/3-position (closed centre) valve. Weight 1.9 kg.

3-Way/3-Position (Tandem Centre) Solenoid Valve With Posi-Check®

Application – Single-acting cylinders.

Actuation – Solenoid operated: 9605 is 115 volt, 50/60 Hz; 9599 is 24 volt, 50 Hz.

Functions – “Advance”, “hold” and “return” positions. When in “advance”, solenoid “B” is energized and oil goes from pump to cylinder through pressure port. In “return” position, solenoid “A” is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in “hold” position, oil from pump is directed back to reservoir while oil is checked in cylinder. The “Posi-Check®” feature holds load when shifting from “advance” to “hold” position.

Used on these pumps – Furnished with pilot lines and adapters for PE55, PE30 (carrying handles must be removed) and PE120 series. For application on other models please contact us.

No. 9605 – 3-way/3-position (tandem centre) solenoid valve, 115 volt, 50 Hz. Weight 6.4 kg.

No. 9599 – Same as 9605 except for 24 volt, 50 Hz circuits.

NOTE: Valves above are shipped without controls. Use 202777 remote hand control. Consult us for field installation.

3-Way/4-Position Manual Pressure Compensated Valve

Application – Single-acting cylinders. Primarily for use in testing soil, rock, concrete, asphalt and related engineering materials.

Actuation – Lever and adjustable, pressure compensated flow control valve.

Functions – Cylinder piston “return”, “hold”, “controlled advance” (pressure compensated) and “advance” (full flow). Will deliver a relatively constant flow regardless of pressure between 70 and 700 bar.

Used on these pumps – PA17, PA46, PA55, PE17, PE21, PE30*, PE46, PE55, PE90, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series.

* NOTE: Adapter kit 252161 is required for mounting this valve to a PE30 or PG30 series pump.

NOTE: This valve can be remote mounted with a 9510 subplate.

No. 9609 – 3-way/4-position manual pressure compensated valve. Weight 4 kg.

CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a No. 9596 Load Lowering Valve or No. 9720 Counter Balance Valve in conjunction with the directional valve used in your application.

IMPORTANT: Conversion kit 251528 must be used when mounting the 9609 valve on PA17 or PE17 pumps.

IMPORTANT: When ordering any valve for a PE30 or PG30 series pump, 1/2" longer mounting screws are required. For valves 9500, 9501 and 9511, order four 12001 cap screws. For valve 9552, 9506, and 9507, order four 11956 cap screws. For valves 9599 and 9605, order four 251078 cap screws. For valve 9609, order four 10855 cap screws.

4-Way/3-Position (Tandem Centre) Manual Valve

Application – Single strand, doubleacting stressing jacks with Power Wedge seater.

Actuation – Lever operated, detent positioned.

Operation
1. With valve in centre position, pump is started.
2. Cable is inserted into stressing tool, valve is placed in “A” position. “Pull” portion of stressing tool is pressurized to specified level for proper cable tensioning (“A” port is checked internally, can only be released by building pressure in “B” position).
3. Valve is placed in “B” position, which is pressure controlled and will not exceed 440 bar. “Return” portion of stressing tool is pressurized and will release “A” port when pressure reaches approximately one-half the “A” port pressure. “A” port remains open as long as this pressure differential is maintained.
4. Pump is stopped, valve is placed in “A” position, releasing “B” port pressure.

Used on these pumps - PA17*, PA46*, PA55, PE17*, PE21*, PE30, PE46*, PE55, PE60, PE84, PE120, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series.

No. 9628 – Post tensioning valve for 700 bar (max.) single-acting/Power Wedge seater. Weight 2.5 kg.

“Twin” 4-Way/3-Position (Tandem Centre) Manual Valve

Application – Multi-strand, double-acting stressing jacks with an auxiliary seating cylinder.

Actuation – Dual lever operated, detent positioned.

Operation –
1. With valves “A” and “B” in centre position, pump is started; cable is inserted into stressing tool.
2. Valve “A” is placed in “Stress” position; cylinder extends to tension cable. Pump pressure controls force exerted by tensioning cylinder in this position. “Stress” port is checked internally, and can only be released by building pressure in the valve “B” return position.
3. When desired cable tension is achieved, valve “A” is placed in valve “B” position and valve “B” in “Seat” position. Seating portion of cylinder will be pressurized to seating pressure controlled by “Seat” relief valve (factory set to 275 bar).
4. Valve “B” is shifted to “Return” position, which is pressure controlled and will not exceed 155 bar. “Return” portion of stressing tool should be pressurized and will release “Stress” port when pressure reaches 15% of “Stress” port pressure.
5. “Stress” port will remain open and cylinder will return as long as pressure differential is maintained. “Stress” and “Seat” ports are open to reservoir.
6. When cylinder has fully returned, both valves are shifted to “Center” position and oil will be directed to reservoir. Maximum pressure setting for the “Seat” relief valve is 420 bar.

Used on these pumps - PA17*, PA46*, PA55, PE17*, PE21*, PE30, PE46*, PE55, PE84, PE120, PE200, PE400, PG30*, PG55, PG120, PG400, PQ60 and PQ120 series.

No. 9632 – Post tensioning valve for 700 bar (max.) double-acting systems. Weight 6.2 kg.