The new generation of electronically-controlled LMI electromagnetic pumps is light and reliable and can be used for a wide range of applications in both aggressive environments and outdoor settings.
With four models and a wide range of liquid end materials available, the ROYTRONIC^® will adapt to your every need (usual chemicals, fluorinated liquids, amines, etc.). 
 

 ADVANTAGES

• Economical
• Suitable for incorporation into a client system (OEM)
• Easy to install and use
• Fast commissioning - priming takes just a few seconds
• Fully compatible with most chemicals
• Dosing of products requiring automatic degassing (hydrogen peroxide, concentrated bleach, etc.) with AutoPrime^™liquid ends
• Flow rate adjustable from 1 to 1,000 ensures that process requirements are accurately met
• Large pumping capacity due to double-ball valves
• External controls (depending on model): by pulse, by 4-20 mA signal, by low level detector, remote on/off, etc.
• Excellent vibration and shock resistance
• Indoor or outdoor use (IP65)

 TECHNICAL CARACTERISTICS

• Available liquid ends:
  • FastPrime^™ liquid ends: standard liquid end, available in PVC, PVDF, PP and Acrylic. Balls: ceramics or PTFE. Seats: aflas^® or PTFE
  • AutoPrime^™ liquid ends: recommended for dosing of products requiring automatic degassing such as hydrogen peroxide, for example. Available in acrylic. Balls: ceramic. Seats: Aflas®
• Maximum flow rates:
  • FastPrime^™ : 12.1 l/h
  • AutoPrime^™ : 10.2 l/h
• Maximum pressures:
  • FastPrime^™: 17.3 bar
  • AutoPrime^™: 10.3 bar
• Other features
  • Accuracy of set flow rate: ±2%
  • Flow rate adjustment: Linear stroke frequency adjustment from 1 to 100%. Recommended stroke length adjustment from 20 to 100%
  • On/off switch
  • LED operating indicator
  • IP 65 protection - External controls are connected using M12 leakproof connectors (IP68)
  • Transparent cover protects front from external attack
  • Live and moving parts are completely protected
  • Maximum ambient temperature: +50 °C
  • Maximum process temperature:+50 °C
  • Maximum viscosity: 50 cP
  • Maximum suction lift: 1.5 m
  • Voltage: 230V and 115V / Frequency: 50 and 60 Hz
  • Series P+7 and P+8 have an optional low level detector linked to an indicator light warning the user that the liquid level is too low
  • The ROYTRONIC^® P+ is supplied with 1 injection nozzle, 1 foot valve, 1 ceramic weight and 2 m of bleed tubing
  • The injection nozzle is fitted with a device allowing for the diffusion of the injected product in the stream of fluid to be treated, preventing crystallisation and heating at the injection point