/

Bearing & Pulley

SPX Power Team Bearing & Pulley

Specifically designed for use with Power Team Push-Pullers and Grip-O-Matic jaw-type pullers

Remove hard to reach parts and bearings, even when space is limited thanks to the pulley attachment’s knife-like edges

Forged alloy steel puller blocks

SPX Power Team made in USA.
SPX Power Team distributor, Warranty and spare parts services available in Iran by Parla Tech.

Order Code	Max. Spread (mm)	X (in.)	Y (mm)	A (mm)	B (mm)	C (mm)	D (mm)	E (mm)	Application - (Use with Puller Nos.)
1121	6.4-22.2	5/16–18	43	11.1	3.2	12.7	34.9	50.8	1020, 1022, and 1023.
1122	3.2-51	3/8–16	62	11.1	4	15.9	50.8	69.9	1024, 1025, 1026, 1027, 7392 and 7393.
1123	9.5-117	5/8–18	111	22.2	9.5	25.4	88.9	114.3	1035, 1036, 1037, 1038, and 927.
1124	12.7-133	5/8–18	152	34.9	11.1	31.8	127	158.8	1039, 1040, 1041, 1042, PH172, PPH17, and 938.
1126	16-203	1–14	181	34.9	17.5	34.9	146.1	190.5	1047, 1043, and 939.
1127	19-340	1–14	260	44.5	17.5	44.5	158.8	215.9	1047, 1073, and 939.
1128	127-327	1 3/4–12	330	44.5	19.1	57.2	327	406	PH553C, and PPH50. When using 1128 with PPH50, two 8024 adapters are required to connect PPH50 to the puller tees.)
1129	152-425	5/8-18	425	47.6	26.2	69.9	400.1	495.3	1079 and 1077 (see No.8024 adapter to connect legs of 1077 to puller tees of 1129)
1130	12.7-219	5/8–18	152	34.9	11.1	31.8	127	158.8	1039, 1040, 1041, 1042, PH172, PPH17, and 938.
679	45-149	5/8–18	152	-	-	-	-	-	1035, 1036, 1037, 1038, and 927.
680	42.3-254	5/8–18	257	-	-	-	-	-	1039, 1040, 1041, 1042, 1047, PH172, PPH30* and 938. (When using 680 with PPH30, two 8012 adapters are required.)