Technical data | User instructions

Application :
This mechanical load cell has been designed to provide a trip point in lifting systems which have a dead end
wire rope. The trip point provide a signal that the user may employ depending on his requirements.
• For a load limiting in lifting systems.
• To limit the speed as a function of the load on traversing.
• To limit the effort applied for pulling.

The load cell is preferable for fitting applications and where it is essential to minimise the lost headroom.

Operating principle :
The load cell operates by the movement of metal within its elastic limit. This movement acts on an adjustable
switch, giving an "all-or-nothing" signal. Movement is limited by the contact of centre's parts.

Technical specifications :
Maximum Capacity : see table below
Safety coefficient : 5
Overload coefficient : 2
Adjustment system : Fine thread screw
Measuring cell : switch.
Version 1 trip : 1 inverter switch 220 Vac / 4 A
Version 2 trips : 2 inverters switches 220 Vac / 4 A
Hysteresis ( ON / OFF / ON ) : 20 daN
Repeatability of cut-out : 1 %
Temperature range : - 30 to 80 °C
Connection : supplied with 2 m lead
Material : stainless steel
Protection class : IP 54