Remote Mounted

3/4-way/2-position solenoid and air actuated valves

700 bar, 1/4" ports 19 l/min max flow

Application - Single or double-acting cylinders.

Actuation - 9593, 9524 and 9554 are solenoid operated, 9595 is air operated.

Operation with single-acting cylinder - Either oil port "A" or "B" must be plugged on valve. With port "B" plugged, solenoid is energized to position "A," oil port "A" becomes pressurized. When solenoid is energized to position "B," oil port "A" becomes the return port.

Operation with multiple single-acting cylinders - A pressure line from one bank can be connected to oil port "A" and the other to oil port "B" on the valve.

Sequence - When energized to position "A," oil port "A" becomes pressurized and clamps the fixture connected to oil port "A"; oil port "B" becomes a "return" port for cylinder connected to oil port "B," and retracts it. The opposite happens when solenoid "B" is energized. Operation with double-acting cylinder: Port "A" is connected to "advance" port of cylinder, oil port "B" connects to cylinder "return" port. Solenoid is energized to position "A," oil port "A" becomes pressurized to extend cylinder piston. The opposite happens when solenoid "B" is energized. Valve does not hold in "retract" position.

NOTE: When using more than one valve on a pump, the tank port may require a check valve to permit inadvertent, momentary extension of a retracted cylinder.

NOTE: If pump is equipped with an internal outlet check, a "hold" position can be maintained with the pump shut off.

No. 9593 – 3/4-way/2-position, remote mounted solenoid valve, 115 volt, 50/60 Hz. Wt., 7 kg.

No. 9524 – Same as 9593 except with 230 volt, 50/60 Hz.

No. 9554 – Same as 9593 except with 24 volt, 50/60 Hz.

No. 9595 – Same as 9593 except is air operated (minimum of 3,5 bar air pressure required). Wt.,5.2 kg.

NOTE: Valves above are shipped without controls. The 9524, 9554 and 9593 can be used with the 304718 remote hand control. The 9595 can be used with the 209593 remote hand control.

NOTE: Valves have 1/4" NPTF ports. 3/8" to 1/4" adapters are included.

NOTE: Maximum tank line pressure for remote mounted valves is 35 bar.

4-way/3-position (closed center) and (tandem center) manual valves with Posi-Check®

700 bar, 3/8" ports 19 l/min max flow

Application - Single- or double-acting cylinder. When used with single-acting cylinders, one port must be plugged. For double-acting cylinders, either port can be used for "advance" or "return"

Actuation - Lever-operated, detent positioned.

Functions - The 9508 provides "advance," "hold" and "return" positions with all ports blocked (closed center) in the "hold" position. The 9509 has "advance," "hold" and "return" with tandem center (cylinder ports are blocked, pump remains running). Both valves have "Posi-Check® " feature to guard against pressure loss when shifting from "advance" to "hold."

No. 9508 – 4-way/3-position (closed center) manual valve, including subplate for remote mounting. Wt., 2,9 kg.

No. 9509 – Same as 9508, except is tandem center.

3-way/2-position solenoid valve

700 bar, 3/8" ports 19 l/min max flow

Application: Single-acting cylinders.

Actuation – Solenoid operated, 115 volt, 50/60 Hz.

Function – Advances cylinder piston when solenoid is de-energized, and pump is running. When solenoid is energized, oil is directed back through valve "return" port and cylinder piston returns. To place cylinder in "hold" position, pump must be stopped or its flow held at the valve "pressure" port with the solenoid deenergized.

NOTE: Valve is equipped with a 9631 snubber valve in port "A." The line from the "return" port of the valve must be unrestricted (7 bar back pressure maximum) back to the reservoir.

IMPORTANT: A 9580 in-line check valve must be installed in the "pressure" port if the supply pump is not equipped with an outlet check valve.

No. 9559 – 3-way/2-position solenoid valve, 115 volt 50/60 Hz. Includes a remote mounting subplate. Wt., 4,4 kg.

No. 9526 – Same as 9559 except for 230 volt, 50/60 Hz.

No. 9556 – Same as 9559 except for 24 volt, 50/60 Hz.

NOTE: Valves above are shipped without control switch. Use 202777 remote hand switch.

4-way/3-position (tandem center) solenoid valve with Posi-Check®

700 bar, 3/8" ports 19 l/min max flow

Application - Double-acting cylinders.

Actuation - Solenoid operated, 115 volt, 50/60 Hz.

Functions - Push button control of "advance," "hold" and "return." The "Posi-Check®" feature guards against pressure loss when shifting from "advance" to "hold." With valve in "hold" position, cylinder ports are blocked and oil is directed from pump to reservoir.

NOTE: Do not allow return tank pressure to exceed 35 bar at the valve.

No. 9514 – 4-way/3-position (tandem center) solenoid valve, 115 volt, 50/60 Hz. Remote hand control included. Wt., 4,6 kg.

No. 9525 – Same as 9514 except for 230 volt, 50/60 Hz.

No. 9555 – Same as 9514 except for 24 volt, 50/60 Hz.

NOTE: Consult factory before installing a pressure switch on any of these valves.

Order No.	Cylinder Type	Operation	Valve Type	Volt	Advance / Return	Advance / Hold / Return	Posi-Check
SA represents single-acting cylinders DA represents double-acting cylinders
9508	SA & DA	Manual	4-way, 3 Pos. Closed Center	—	no	yes	yes
9509	SA & DA	Manual	4-way, 3 Pos. Tandem Center	—	no	yes	yes
9514	DA	Solenoid	4-way, 3 Pos. Tandem Center	115	no	yes	yes
9524	SA & DA	Solenoid	3/4-way, 2 Pos.	230	no	yes	no
9525	DA	Solenoid	4-way, 3 Pos. Tandem Center	230	no	yes	yes
9526	SA	Solenoid	3-way, 2 Pos.	230	no	yes	no
9554	SA & DA	Solenoid	3/4-way, 2 Pos.	24	no	yes	no
9555	DA	Solenoid	4-way, 3 Pos. Tandem Center	24	no	yes	yes
9556	SA	Solenoid	3-way, 2 Pos.	24	no	yes	no
9559	SA	Solenoid	3-way, 2 Pos.	115	no	yes	no
9593	SA & DA	Solenoid	3/4-way, 2 Pos.	115	no	yes	no
9595	SA & DA	Air	3/4-way, 2 Pos.	—	no	yes	no